LET THE EXPERIENCE BEGIN! It’s recommended that you fully charge your viewer before using. Charge Your Trail Cam Viewer AT HOME Using the standard 110v adapter for in-home use, plug adapter into the wall and then plug cord into DC 5v Port E on the side of the viewer. IN VEHICLE Using the 12v car adapter, plug the adapter into the vehicle’s 12v plug and then plug the other end into the USB Port D on the side of the viewer. Viewing Your Trail Cam Photos & Videos Touchscreen operation! With a tap of your finger, you can perform a multitude of functions to view and study your pictures and videos. Step 1 – TURN ON Turn the viewer on by pressing and holding the Power Button A located on the top of your viewer for a few seconds. You will see an introductory animation; the home screen appears next. Step 2 – INSERT SD CARD Insert the SD card from your trail camera into the Trail Cam Card Port B on the side of your viewer until it clicks into place. Step 3 – TAP ‘VIEW PHOTOS’ ICON Tap the View Photos icon in the center of the home screen. Two folders will appear: the Trail Cam Card folder and the Save Card folder. Step 4 – VIEW PHOTOS LOWDOWN gives you three viewing mode options; Quick View (eight images displayed at once), Full View (one image at a time either 3/4 or Full Screen) and Slide Show. QUICK VIEW MODE Tap the Trail Cam Card folder and your photos will appear in a double row (eight images). This Quick View mode allows you to view images more quickly. With your finger, swipe across the screen to view additional photos from your micro SD card. FULL VIEW MODE (3/4 SCREEN OR FULL SCREEN) Tap a photo to enlarge it to 3/4 Screen. Swipe to view more photos at 3/4 Screen. Tap the photo again to go to Full Screen. Swipe to view more photos at Full Screen. ZOOM IN (FULL VIEW MODE) While in Full View mode, touch the screen with your forefinger and thumb and spread apart to zoom in. Use one finger to move your zoomed photo around. GO FROM FULL SCREEN TO 3/4 SCREEN When at Full Screen, tap the green Back Arrow icon in the upper left-hand corner of the screen to go back to 3/4 Screen format. This format allows you to swipe through the photos more rapidly until you again want to take a closer look. SLIDE SHOW MODE A slide show can be viewed (3/4 Screen or Full Screen) by touching the green Triangle icon in the upper right hand corner of the screen. To stop the slide show, touch the photo. Save Photos and Videos on Micro SD Card (not included) Save photos and videos to a separate MICRO SD CARD when installed in your viewer (LOWDOWN accepts up to 32 GB Micro SD Card – not included). Step 1 – INSERT MICRO SD Insert your micro SD card into the Save Card Port C until it locks into place in the side of the viewer. Step 2 – TAP ‘SELECT’ With the double row of photos on your screen, tap Select in the upper right-hand corner. Step 3 – SELECT PHOTOS TO SAVE Tap to select the photos or videos you want to save. They will highlight in green. Then tap the Save icon in the upper right corner to save those images to your micro SD card. Step 4 – TAP OK TO SAVE A Save Notification will appear in the center of the screen. Tap OK to save to the micro SD card, or if you have made a mistake, you can tap Cancel, and then tap Cancel again to un-highlight the photos. Step 5 – SAVE IMAGES IN OTHER MODES Save photos to your micro SD card while viewing 3/4 Screen and Full Screen by tapping the Save icon in the upper right-hand corner and then selecting OK when it appears. Viewing Your Saved Photos and Videos View saved photos and videos by touching the Back Arrow icon in the upper left-hand corner until your two folders appear. Then tap the Save Card folder to view all the photos and videos you’ve saved onto your micro SD card. Delete Photos and Videos It’s quick and easy to delete unwanted images. Step 1 – TAP ‘SELECT’ With the double row of photos on your screen, tap Select in the upper right-hand corner. Step 2 – SELECT PHOTOS TO DELETE Tap to select the photos or videos you want to delete. They will highlight in green. Then tap the Trash icon in the upper right-hand corner of the screen. Step 3 – TAP ‘OK’ TO DELETE A Delete Notification will appear in the center of the screen. Tap OK to delete the photos and videos you have selected, or if you have made a mistake, you can tap Cancel, and then tap Cancel again to un-highlight the photos. Step 4 – DELETE ON OTHER SCREENS Delete photos while viewing 3/4 Screen and Full Screen by tapping the Trash icon in the upper right-hand corner and then selecting OK when it appears. Delete Entire Folders Delete folders full of images in just seconds. Step 1 – TAP ARROW ICON Tap the Back Arrow icon in the upper left-hand corner until the two folders appear in the center of the screen. Step 2 – SELECT FOLDER TO DELETE You can delete the entire contents of the Trail Cam Card folder or the Save Card folder by touching and holding your finger on the folder you want to delete until it becomes highlighted in green. Step 3 – TO DELETE ALL OF THE ‘TRAIL CAM CARD’ CONTENTS If you highlighted the Trail Cam Card folder, tap the Trash icon in the upper right-hand corner of the screen. A Delete Notification will appear in the center of the screen. Tap OK to delete the entire contents of the Trail Cam Card folder. Your SD card is now ready to be inserted into your trail camera. TO DELETE ALL OF THE SAVED FILES IN THE ‘SAVE CARD’ FOLDER If you highlighted the Save Card folder, tap the Trash icon in the upper right-hand corner of the screen. A Delete Notification will appear in the center of the screen. Tap OK to delete all of the saved images in the Save Card folder, or if you have made a mistake, tap Cancel, then tap Cancel again to un-highlight the folder. View Images For All To See On Your TV Your viewer can also be connected with an HDMI cable to your flat screen TV to view your photos and videos with family and friends. Conserve Battery Power ‘STANDBY’ AND ‘SLEEP’ MODES SAVE BATTERY POWER Your viewer can be set in Standby mode for short periods of time when it is not in use by pressing the Power Button A . The viewer will also go into Sleep mode after two minutes of inactivity. To reactivate the viewer, just press the Power Button. ‘POWER OFF’ TO EXTEND BATTERY LIFE To turn your viewer off, press and hold the Power Button. A prompt will appear. Selecting Power Off will turn off your viewer and prevent further battery drain.